基于在轨热环境的可展开天线反射面精度调整技术

随着宇航事业的发展,网状展开天线的尺寸越来越大,对形面精度要求越来越高(特别是高频段),在轨热环境与地面调整点的热环境差别大,必须采用基于在轨热环境的网面精度调整技术以满足反射面的精度要求。就在轨热环境下的辅助牵引面式网面精度调整技术的理论分析及调整方法进行了探讨,给出了计及在轨热环境的网面形状精度调整的基本理论公式及调整步骤,并对某样机进行了调整计算。计算结果表明,文中的分析、公式、方法是正确的,可行的。     

航天用35Ah氢镍电池组性能

简要介绍了电池组的构成以及电池组空间力学环境测试条件和模拟GEO试验制度。在电池组性能方面 ,比较了第 1阴影期中间和第 36阴影期中间 79%DOD的放电特点 ,概要介绍了充放电温度特性 ,容量与氢压的变化关系 ;特别在寿命特性方面 ,着重阐述了电池组在模拟GEO ,79%DOD下 40个阴影期间最大放电深度时终止电压变化特性 ,电池组容量变化以及第 3阴影期和第 36阴影期放电终止电压变化情况。还列出了电池组的主要技术性能指标。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

伴飞卫星自主相对导航衰减记忆滤波算法

为实现伴飞卫星的自主相对导航,基于C-W方程提出了一种在伴飞卫星轨道系中建立简化的相对运动方程构成星上轨道递推、根据导航敏感器输出进行量测更新的导航滤波器,并利用衰减记忆滤波算法抑制系统模型误差对相对导航结果的影响。仿真结果表明,该滤波算法可实现伴飞星的自主相对导航。它不仅较C-W方程更简单,而且适于模型不准确时的相对导航,工程实现易。     

卫星脉冲推力最优逃逸返回轨迹的非线性规划

重点研究了卫星通过轨道机动逃避碰撞、拦截并经一段时间后返回原轨道的逃逸方式。利用非线性规划理论建立了脉冲推力能量最省的逃逸轨迹规划模型，并考虑非球形摄动的影响对模型进行了修正。通过仿真验证了模型的正确性及求解的可行性，并分析了非球形摄动因素对逃逸过程的影响。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

开发月球车用的月表环境的地面模拟方法研究

当前中国正在进行自己的探月工程,预计将会发射月球车登陆月球表面.在研制月球探测器过程中,为了在地面验证月球车的可靠性和各项功能(如着陆冲击、自主巡航和遥控),必须建立相应的地面试验中心.根据目前对月球表面环境的认识和现有的仿真技术,文章提出了实现月表综合环境模拟的试验设施的设想.由于月球表面环境非常恶劣并且月表的地形也非常复杂,文章提出了一种组合式月表环境模拟器的设想.主要部分是模拟各种月貌特征(如陨石坑、斜坡、沟壑等)的可移动单元.每个单元是一个用模拟月壤制作的小沙盘,其化学成分、组成颗粒分布和力学性能和已经获取的真实月壤样品相似.根据不同的试验要求,选择相应的单元按照一定的规律组合成为试验场.这样在有限的场地面积内可以按需实现对月表不同地域的地貌特征模拟.同时,可以选择少量单元的组合构成更小规模的试验场,以方便与其它环境模拟器(如落塔,热/真空容器等)联合,实现模拟月表的综合环境.